EVSE - Setup
EVSE - Setup — Configures one EVSE charging board
Library
Simulink Real-Time - Speedgoat
Description
The EVSE Setup block configures one EVSE charging board, establishing the MQTT
connection to the EV Charging box using the configured IP address and allows to
configure some static base parameters of the system. However, these parameters can
still be overwritten in later stages of the charge cycle if needed.
Ports
This driver block has no input or output ports.
Parameters
The two tabs of the setup parameter dialog box contain the configuration settings
for the EVSE charging board.
Main Tab
-
Station ID
The Station ID is used to assign
Setup, Read and Write blocks to a particular MQTT client station.
Station IDs range between 0 to 65535 and must be unique along all Setup
blocks in a model. You can define multiple clients by placing a Setup
block with a unique Station ID for each client.
-
Connection ID
The Connection ID is used to assign
Publish and Subscribe blocks to a particular client-broker connection.
Connection IDs range between 0 to 65535 and must be unique along all
Connections blocks of the client (these blocks have the same Station
ID).
-
Client Identifier
The Client Identifier represents the MQTT client in the local network
and must be unique along all clients in that network. The parameter is a
character array with a length limit of 256.
-
Local IP Address
Enter the IP address of the MQTT client. This step does not assign the
IP address to an Ethernet interface; instead, it binds the Setup block
to an IP address, which was previously configured in the Ethernet
Configuration Tool. Refer to the MQTT usage notes for
further information.
-
Sample Time
Defines the base sample time at which data is exchanged with the EV
charging board. This parameter can also be set to -1 for inherited sample time. The units are in
seconds.
-
Remote TCP Port
Enter the TCP port the remote MQTT broker is listening on for
connection requests. The default value is 1883.
-
Remote IP Address
Enter the IP address of the EV charging board.
Charging Configuration Parameters Tab
-
Max. Voltage Limit [V]
Specify the maximum voltage limit of the EVSE station in volts.
-
Max. Current Limit [A]
Specify the maximum current limit of the EVSE station in
amperes.
-
Min. Current Limit [A]
Specify the minimum current limit of the EVSE station in
amperes.
-
Max. Power Limit [W]
Specify the maximum power limit of the EVSE station in watts.
-
Min. Voltage Limit [V]
Specify the minimum voltage limit of the EVSE station in volts.
-
Current Regulation Tolerance
Specify the current regulation tolerance of the EVSE station in
percentages (0-100).
-
Peak Current Ripple
Specify the peak current ripple of the EVSE station in amperes.