EVSE - Parameter Read
EVSE - Parameter Read — Reads data from the EVSE
board during the Parameter Discovery state of the charge
cycle.
Library
Simulink Real-Time - Speedgoat
Description
The EVSE Parameter Read block reads data from the EVSE charging board during the
Parameter Discovery state of the charge cycle.
Ports
Outputs
-
EV Requested Energy Type
The energy type requested by the connected EV. Following enumeration
table "energyTransferType" ISO 15118-2:
0: AC_single_phase_core
1: AC_three_phase_core
2: DC_core
3: DC_extended
4: DC_combo_core
5: DC_unique
-
EV Departure Time
The departure time communicated by the EV in seconds from now.
-
EV Max Voltage Limit
The maximum voltage limit of the EV in volts.
-
EV Max Current Limit
The maximum current limit of the EV in amperes.
-
EV Min Current Limit
The minimum current limit of the EV in amperes.
-
EV Max Power Limit
The maximum power limit of the EV in watts.
-
EV Ready
Indicates if the EV is ready to charge generally.
-
EV Errorcode
Errorcode following enumeration table "DC_EVErrorCodeType" ISO
15118-2:
0: EV_NO_ERROR
1: EV_FAILED_RESS_TEMPERATURE_INHIBIT
2: EV_FAILED_EV_SHIFT_POSITION
3: EV_FAILED_CHARGER_CONNECTOR_LOCK_FAULT
4: EV_FAILED_EVRESS_MALFUNCTION
5: EV_FAILED_CHARGING_CURRENTDIFFERENTIAL
6: EV_FAILED_CHARGING_VOLTAGE_OUT_OF_RANGE
7: EV_RESERVED_A
8: EV_RESERVED_B
9: EV_RESERVED_C
10: EV_FAILED_CHARGING_SYSTEM_INCOMPATIBILITY
11: EV_NO_DATA
-
EV RESS SOC
Current state of charge (SoC) of the EV's rechargeable energy storage
system (RESS).
-
EV Energy Capacity
Energy capacity of the EV in watt-hours.
-
EV Energy Request
Energy requested by the EV in watt-hours.
-
EV Full SOC
State of charge (SoC), in percentage, that the EV considers fully
charged. Typically 100.
-
EV Bulk SOC
State of charge (SoC), in percentage, at which the EV's bulk charge is
complete. Typically 80.
Parameters
-
Station ID
Defines the Station ID of the corresponding Setup block. Must range
between 0 and 65535.
-
Connection ID
Defines the Connection ID of the corresponding Setup block. Must range
between 0 and 65535.
-
Sample Time
Defines the base sample time at which this driver block gets its
sample hit. This parameter can also be set to -1 for inherited sample time. The units are in
seconds.