IO611 - LIN Status v2
IO611 - LIN Status v2 — This block provides status
information from the LIN channel
Library
Simulink Real-Time - Speedgoat
Description
This block provides status information from the LIN channel.
Ports
Outputs
-
Op_Mode
This port can have the following values:
Data
Types:uint32
-
Baud Rate
The current configured baud rate.
Data
Types:uint32
-
BusLoad
The current percentage (0..100) of LIN bus load.
Data
Types:uint32
-
Data_Overrun
1 if data overrun occurred.
Data
Types:uint32
-
Init_Mode_Act
1 if LIN controller is still in init mode.
Data
Types:uint32
Parameters
-
Module ID
This ID defines the link to the corresponding Setup block
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.
- Get status for channel
Choose the LIN channel to which this driver block should be
connected.
- Enable OP Mode
Enables the output port for operation mode information.
- Enable Baud rate
Enables the output port for baud rate information.
- Enable Busload
Enables the output port for busload information.
- Enable Data Overrun
Enables the output port for data overrun information.
- Enable init mode active
Enables the output port for init mode information.