IO611 - LIN Status
IO611 - LIN Status — This block provides status
information from the LIN channel
Library
Simulink Real-Time - Speedgoat
Description
This block provides status information from the LIN channel.
Ports
Outputs
-
Op_Mode
This port can have the following values:
Data
Types:uint32
-
Baud Rate
The current configured baud rate.
Data
Types:uint32
-
BusLoad
The current percentage (0..100) of LIN bus load.
Data
Types:uint32
-
Data_Overrun
1 if data overrun occurred.
Data
Types:uint32
-
Init_Mode_Act
1 if LIN controller is still in init mode.
Data
Types:uint32
Parameters
Block Setup
-
Module ID
Specifies the ID of the IO61X module this driver block should be
connected to. It must correspond to the module ID of the according setup
block. Check the setup block help for more details.
-
Sample Time
Defines the base sample time at which this driver block gets its
sample hit. It can also be set to -1 for inherited sample time. The
units are in seconds.
-
Get Status for Channel
Choose the LIN channel to which this driver block should be connected.
-
Status
In the "Status" tab, the user can select the required status signals.
The selected signals appear as block outputs.