I2C - Slave write v1
I2C - Slave write v1 — The I2C Slave write driver
block allows data to be written to any register in the register bank of the code
module. This write operation is asynchronous with the I2C
protocol.
Library
Simulink Real-Time - Speedgoat
Description
The I2C Slave write driver block allows data to be written to any register in the
register bank of the code module. This write operation is asynchronous with the I2C
protocol.
Ports
This driver block has one input port.
Inputs
-
Data
The data to write to the registers. The input port width is equal to
the number of registers as configured in the Registers parameter.
Parameters
-
Configurable I/O Module ID
This parameter associates a code module block with a configurable I/O module setup
block. Set this value to match the Module ID defined in the setup block of the
required configurable I/O module.
-
Channel
The number of the channel which this driver block entity will access. Only one
channel per driver block can be addressed. You can specify channels in the range 1-N
(N = the number of channels implemented in your specific configuration file defined
in the Setup block).
-
Registers
A vector which defines the registers to write. Registers are numbered
in the range 1 to 256.
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.