Serial - Read HW FIFO v2
Serial - Read HW FIFO v2 — The Serial Read HW FIFO
driver block allows data to be read from a serial
transceiver
Library
Simulink Real-Time - Speedgoat
Description
The Serial Read HW FIFO v2 driver block can read up to 4 KB of data present in the
I/O module hardware buffer.
Ports
Outputs
-
Number of Bytes Read
A scalar which indicates how many bytes were extracted from the HW
FIFO.
-
Data
A vector of 4096 elements which represents the Serial HW FIFO.
Parameters
-
Configurable I/O Module ID
This parameter associates a code module block with a configurable I/O module setup
block. Set this value to match the Module ID defined in the setup block of the
required configurable I/O module.
-
Channel
The number of the channel which this driver block entity will access. Only one
channel per driver block can be addressed. You can specify channels in the range 1-N
(N = the number of channels implemented in your specific configuration file defined
in the Setup block).
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.