IO623 - Send
IO623 - Send —
Sends FlexRay frames
Library
Simulink Real-Time - Speedgoat
Description
This block allows FlexRay frames to be transmitted and can be placed in your model
as many times as required.
Ports
Inputs
-
CCX (X is the communication controller number)
Payload of the FlexRay frame to send. This must be a vector with the
width of the configured payload length in 16-bit words.
Data Type:
uint16
Parameters
The configuration details are all defined in the Setup block.
-
Module ID
This ID defines the link to the corresponding Setup block
-
Communication Controller
Set the communication controller (CC)/bus interface to which to send
the FlexRay frames. Only frames configured in the CHI file that have
been selected in the Setup block can be sent.
-
Select Frame to Send
Click this button to obtain a list of all available FlexRay frames to
send.
The content of this list depends on the CHI file that has been
selected in the Setup block and the chosen CC above.
-
Selected Frame
Contains information about the selected FlexRay frame to send. This
field cannot be edited and is only for information purposes.
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.