OPC UA - Client Setup
OPC UA - Client Setup — Configures one OPC UA client
station
Library
Simulink Real-Time - Speedgoat
Description
The Setup block configures one OPC UA client station, allows the Connection block
to connect with OPC UA servers and enables the Read and Write blocks to exchange
data on the network. Every OPC UA Client Setup block in the model requires a runtime
license.
Ports
This driver block has no input or output ports.
Parameters
-
Station ID
The Station ID is used to assign Setup, Connection, Read and Write
blocks to a particular client station. Station IDs range between 0 to
65535 and must be unique along all OPC UA Client and Server Setup blocks
in a model. You can define multiple clients by placing a Setup block
with a unique Station ID for each client.
-
Local IP Address
Enter the IP address of the OPC UA client. This step does not assign
the IP address to an Ethernet interface. Instead, it binds the Setup
block to an IP address which was previously configured in the Ethernet
Configuration Tool. Refer to the OPC UA usage notes
for further information.
There is no need to specify a TCP port as TCP ports are automatically
assigned to clients.