ARINC 825 - Update Scheduled Message
ARINC 825 - Update Scheduled Message — Update
scheduled messages
Library
Simulink Real-Time - Speedgoat
Description
This block updates the specified scheduled message(s). Multiple blocks can be used
per channel.
Ports
Inputs
-
Data
CAN(-FD) message(s) with the corresponding ID to update.
CAN-FD message:
Protocol Mode: Not used (Predefined in the Setup
block)
Extended: Not used
Length: Number of data bytes
Remote: Not used
Error: Not used
BRS: Not used (Predefined in the scheduled messages table
in the Setup block)
ESI: Not used
DLC: Not used
ID: Message ID
Timestamp: Not used
Data: Payload data vector
-
Enable
Enable/Disable CAN message(s) updates.
Parameters
-
Module Type
Select the type of your I/O Module installed in your target
machine.
-
Module ID
This ID defines the link to the corresponding Setup block
-
Channel
Select the channel to which this driver block corresponds.
-
Message ID
Specify the 29-bit ID of the message(s) to be updated.
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.
-
Show Enable Input
Select whether the enable input is active. Otherwise messages are
always updated.