IO324-200k
IO324-200k — The IO324-200k is a FPGA I/O module
with 200k of logic cells, 32 TTL I/O lines (of which up to 16 lines can be
configured as RS422/RS485), 32/16 x 16-bit single-ended/differential analog
inputs and 8 x 16-bit analog outputs
Introduction
Configurable I/O modules provide a flexible and cost-effective way to configure and
reconfigure I/O and protocol functionalities for a set of code modules.
Configuration files, once purchased from Speedgoat, can be downloaded from the
Speedgoat Customer Portal and also come with the following items:
Documentation: Comprehensive
documentation including installation steps, descriptions of implemented
functionality, pin mapping diagrams and explanations on how to get started
with demo model examples
Simulink® Library: A Simulink
library, including links to the main Speedgoat I/O Blockset, and which
clearly shows the version of the driver blocks that match with your specific
FPGA bitstream
Simulink demo model: A simple demo model
illustrating how the implemented code module functionality is used, with
loopback wirings wherever possible
![[Note]](images/note.png) | Note |
|---|
Further information on the IO324-200k I/O module is also available in the HDL
Coder help. |
Driver Blocks
Use the configurable I/O module Setup block to define the
parameters for your I/O module. Based on the I/O and protocol functionalities
implemented in your configuration file, a broad range of different driver
blocks are supported.