Documentation

Depending on the value of the "Port type" parameter, this block will have different port setups:

One input port of data type uint8

The parameter Port Type parameter is set to Byte Vector.

The port has no label. The number of elements results from the total length of the Tx PDO mapping table in the related Setup block. Please consider the byte padding which is described in the Setup block Help documentation.

Multiple input ports of different data types

The Port Type parameter is set to Separate Signals.

There is one port for each signal defined in the Tx PDO mapping table in the related Setup block. Padding bits are not output. The port label consists of the PDO name and the signal name of the related Tx PDO mapping row.

This block does not have any output ports.

Module ID

This ID defines the link to the corresponding Setup block

Port Type

• Byte vector: The block has only one port of data type uint8 where all the related PDOs are packed in consecutively

• Separate signals: The block has multiple ports. There is one port for each PDO signal

Sample Time

Defines the base sample time at which this driver block gets its sample hit. This parameter can also be set to -1 for inherited sample time. The units are in seconds.

	Caution
	All blocks that interface with the same I/O module must have identical sample times.

Retrieve PDO Configuration

Retrieves the PDO configuration from the related Setup block and updates the input ports.