IO643 - Send
IO643 - Send — Transmits cyclic data to CANopen
slaves
Library
Simulink Real-Time - Speedgoat
Description
This block is used to transmit data to CANopen slaves connected with the
IO643.
Your model can contain only one Send block for each I/O
module in your target machine.
![[Tip]](images/tip.png) | Tip |
|---|
You can autogenerate the entire data assembly and extraction part for your
model including Send, Receive, Packing and Unpacking blocks with the help of the
createFromSycon function. |
Ports
Inputs
One vector of data type UINT8 that the block writes to the output data
area of the dual-port memory. This area contains data that is sent to
the CANopen slaves. Use Byte Packing
blocks to assemble the vector from specific data. The Number of Bytes parameter sets the length of
this vector.
Type:
scalar | vector
Data Type:
uint8
Outputs
This block does not have any output ports.
Parameters
-
Module ID
This ID defines the link to the corresponding Setup block
-
Number of Bytes
This parameter defines the length of the input port and thus the number of
bytes to be written to the module's output data area (TX). Refer to the usage
notes to learn how to use this parameter.
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.
![[Caution]](images/caution.png) | Caution |
|---|
All blocks that interface with the same I/O module must have identical
sample times. |