Documentation

This parameter associates a code module block with a configurable I/O module setup block. Set this value to match the Module ID defined in the setup block of the required configurable I/O module.

Select the mode or disable the specified interface.

	Note
	The number of interfaces displayed depends on the number of I/O interface extensions (-40) activated in the FPGA setup block.

Set the audio clock to either 44.1 kHz or 48 kHz for the A2B network. Make sure you use the same setting in the configuration file.

	Note
	In case several nodes are used as main node, the Audio Clock must be the same for all nodes.

Specify the frame size for the TDM data.

Specify the path of the configuration file (.dat) to set up the A2B network. Click the Browse button to easily find your file or enter the file name manually. The nework configuration file only needs to be set in case the corresponding A2B node is used as a main node.

Specify the path of the node configuration file in order to configure the corresponding A2B interface. Click the Browse button to easily find your file or enter the file name manually. By clicking the Update button, the whole configuration file is parsed again.