IO781 - Send
IO781 - Send — Writes to an A653 Comm (Queuing type
or Sampling type) port
Library
Simulink Real-Time - Speedgoat
Description
IO781 AFDX Send block is used to write to an A653 Comm (Queuing type or Sampling
type) port.
Ports
Inputs
-
Data
Data to send. The port width must be set in the block mask. Data type
is uint8.
Parameters
-
Module ID
This ID defines the link to the corresponding Setup block
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.
-
Port ID
ID of the A653 Tx Comm port. This value must be set according to the
configuration designed with Flight Simulyzer and stored in the .adc
file. If this field refers to a non-existing port in the ES
configuration, a fatal error will occur, causing a target machine crash.
Be aware, this ID is not the UDP port ID but rather the ID of the port
configuration in the .adc file.
-
Message Length
Defines the output port width (in bytes).