IO751 - Send
IO751 - Send — Transmit cyclic data from the
Controller to the PROFINET network
Library
Simulink Real-Time - Speedgoat
Description
This block is used to transmit cyclic data from the Controller to the PROFINET
network.
You can only use one PROFINET Controller Send block for each physical module
installed.
Ports
Depending on the value of the "Port type" parameter, this block will have:
n input ports of type uint8, where n is defined by the "Output Data Bytes"
parameter, or
1 input port which is a vector with n elements, where n is defined by the
"Output Data Bytes" parameter.
Inputs (n ports of type uint8)
-
1
Data byte to send. Type uint8.
-
X (X is the port number, between 1 and the value of the "Output
Data Bytes" parameter)
Data byte to send. Type uint8.
Inputs (1 port with n vector elements)
-
Out
A vector of data bytes to send. The number of elements in the vector
is defined by the "Output Data Bytes" parameter.
Parameters
-
Module ID
This ID defines the link to the corresponding Setup block.
-
Port type
The type of the input ports. Options are:
-
Output data bytes
The number of bytes that are sent to the PROFINET controller. TIP: Use
the "Byte Pack" block to send the data.
-
Sample time [s]
Defines how often this block is updated.