IO203 - Write v1
IO203 - Write v1 — Writes the IO203 digital
outputs
Library
Simulink Real-Time - Speedgoat
Description
To write to the digital outputs, one block per channel group (Lower & Upper) can
be added to the Simulink model for each module of this type in your target machine.
Ports
This driver block has no output ports. The input ports can be set to 5 different
types:
32 ports of type double
32 input ports of type double are shown. Each port is a scalar with a value of
either 0.0 (Low) or 1.0 (High).
32 ports of type boolean
32 input ports of type boolean are shown. Each port is a scalar with a value of
either 0 (Low) or 1 (High).
1 port with 32 element vector of type double
One input port of type double is shown. The port has a width of 32 with each
element having a value of either 0.0 (Low) or 1.0 (High).
1 port with 32 element vector of type boolean
One input port of type boolean is shown. The port has a width of 32 with each
element having a value of either 0 (Low) or 1 (High).
1 port with scalar of type uint32
One input port of type uint32 is shown. The port is a scalar containing all 32
channels as a single uint32 value.
Parameters
-
Module ID
This ID defines the link to the corresponding Setup block
-
Channel Group
Select either Lower or Upper as appropriate.
-
Port Type
Select one of the five available port types.
-
Sample Time
Defines the base sample time at which this driver block gets its sample hit. This
parameter can also be set to -1 for inherited
sample time. The units are in seconds.